Shop Online Stores

Price - $65.99

Chicago Pneumatic C115811 is a Rebuild Kit for CP0611.

read the full article

Price - $214.99

” -Super Duty -Teasing throttle for precise control -Needle bearing gearing for improved durability -The right tool for heavy drilling, reaming, hole sawing and jobs requiring a lot of torque -Free Speed 500 rpm “

read the full article

Price - $89.99

“When Chicago Pneumatic was developing the CP7268, they never imagined it would surpass even their expectations - but it did. The CP7268 Straight Line Sander was designed for power, performance, and durability. The twin-piston motor can generate 3,000 balanced one-inch strokes per minute, making it easy for the user to complete high-volume shaping and smooth in no time. At just over 6 lbs., it easy to handle and the ergonomic design gives you the all of the control you could ever desire. Body shop technicians will surely appreciate the ability to quickly remove material, smooth body filling, and level side panel work.”

read the full article

Price - $59.99

“-Compact, lightweight design for easy maneuverability-Built-in regulator-Complete with 1/4 and 6mm collet-Excellent for high speed blending, smoothing, porting and deburring in confined areas”

read the full article

Price - $109.99

” -Rugged, energy efficient 1/2 HP motor -Lightweight at only 1-5/8 lbs -Square handle design for positive grip -Excellent for cutting through sheet metal, fiberglass, bolts, muffler clamps and hangars “

read the full article

Price - $200.99

” The Chicago Pneumatic 8940161655 QRS5704S is a 1/2" Electric Automatic Compressor Drain. It automatically drains filters, compressor tanks, drip legs, after coolers and receivers. Opens and closes valve in 1 to 60 minute cycle times and 1 to 30 second blow down time. “

read the full article

Price - $49.99

#NAME?

read the full article

Price - $82.99

#NAME?

read the full article

Price - $99.99

“The Chicago Pneumatic CP7200S is a Mini Random Dual Action Orbital Sander Kit. It is compact and lightweight which helps for easy access in tight areas and also has a rubber molded palm grip for added comfort. The Sander has an adjustable power regulator, its two finger throttle makes it easier to control and ensures a reduced amount of fatigue. The tool also has a silenced handle exhaust that directs air away from work area.”

read the full article

Price - $169.99

“-Fast, with 30 ft-lbs of torque at 7000 RPM-Compact and lightweight for easy access to the tight spots - only 4-1/2 long at 2-1/2 lbs-One hand push button forward/reverse power regulator-Perfect for small engine repair, small fasteners and body shops”

read the full article

Price - $121.99

“Chicago Pneumatics line of premium high-performance sockets combine strength, durability, looks and top quality. From tough, chrome-moly steel construction to the laser-etched, easy-to-read socket size, these are the only impact sockets youll ever need. Each set packaged in a sturdy case. Limited lifetime warranty.”

read the full article

Price - $144.99

-Durable clutch mechanism with oil lubrication-Contoured elastomer handle grip provides comfort and ergonomics-Handle exhaust directs air away from work piece and operator-Plunger type reverse valve for true one-hand operation-Compact and lightweight for

read the full article

Price - $79.99

“Chicago Pneumatic CP7110 Heavy Duty Air Hammer. Powerful, yet economical for fast cutting action. Vibration isolation system for smoother operation and greater comfort. Unique cushioned exhaust deflector on barrel for comfort and control. Touch trigger for precision start ups and total control. Ideal for exhaust system work, bolt cutting, bushing driving, shearing and front end work.”

read the full article

Price - $149.99

“The Chicago Pneumatic CP7220 is a 6 Random Orbital Dual Action Palm Sander. It has a 2.5 mm orbit for high quality finishing. The sander is easy to handle, compact and lightweight and provides the best power to weight ratio in its class. The 0.3 HP oil free motor delivers the power needed to get the job done while keeping the work area free of contaminants. The 6 palm sander has a Triple balance design which provides balance with low vibration for superior control. It also has an adjustable speed regulator with safety shut off for maximum control.”

read the full article

Price - $44.99

The Chicago Pneumatic 8940161786 QRS9072F is a pack of 5 disposable 1/4 In-Line Air Tool Filter. The in-line filter protects air tools from dirt and debris and can be attached directly to pneumatic tools. Replaceable 40 micron sintered bronze element.

read the full article

Price - $112.99

#NAME?

read the full article

Price - $59.99

The Chicago Pneumatic 8940161778 QRS354L is a 1/2 Airline Lubricator. It injects a fine stream of oil into the air stream to automatically lubricate air operated tools and other devices. Features three position non-rising knob-push to lock pull to adjust and detach to make tamper resistant.

read the full article

Price - $514.99

-6 extended anvil for tire work -Lightweight at only 21 lbs -Rocking dog clutch for smooth operation and extreme durability -Convenient reverse valve for easy directional changes -High performance motor maximizes output while minimizing air consumption

read the full article

Price - $109.99

-Four position swivel head-15ft of ultimate torque-250 rpm of free speed-Compact and light weight-Rear exhaust-Easy access forward/reverse switch on head-One Piece aluminum body-Locking swivel control sleeve-Easy handle throttle control

read the full article

Price - $67.99

“Chicago Pneumatic CP711K Regular Duty Air Hammer Kit is powerful yet economical for fast cutting action, 3500 blows per minute, it is designed for muffler and pipe removal, body shop and shock work, scraping rust and light front-end work also has Quick-Change retainer for fast and easy accessory change.”

read the full article

Price - $36.99

“The Chicago Pneumatic S3113D is a 13-Piece 3/8 Deep Metric Standard Impact Socket Set. The set has through hardened chrome-moly alloy steel construction, the best choice for durability, strength and long life. Large, easy to read, laser etched numbers allows to quickly and easily identifying size. It includes 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm standard sockets.”

read the full article

Price - $69.99

” The Chicago Pneumatic 8940161652 QRS53-02D is a 1/4" Automatic Float Drain. It automatically discharges water from air receiver tank. The float type drain features a protective stainless steel screen with umbrella baffle, providing large sump area for oil, sludge and dirt. “

read the full article

Price - $109.99

” -Chicago Pneumatic 7300R 1/4 Reversing Mini Drill -General purpose, reversible drill. 2,700 rpm -Compact and lightweight for easy handling -Plenetary gearing with brass bushings -Jacobs chuck 1/4 inch capacity “

read the full article

Price - $119.99

“The Chicago Pneumatic S3012D is a 12-Piece 3/8 Deep SAE Impact Socket Set. The set has through hardened chrome-moly alloy steel construction, the best choice for durability, strength and long life. Large, easy to read, laser etched numbers allows to quickly and easily identifying size.”

read the full article

Price - $106.99

” The Chicago Pneumatic CP7202D is a Mini Disc Sander Kit. It is compact and lightweight which helps for easy access in tight areas, it has a rubber molded palm grip for added comfort. The Sander has an adjustable power regulator, its two finger throttle makes it easier to control and ensures a reduced amount of fatigue. The mini disc sander also has a silenced handle exhaust that directs air away from work area. “

read the full article