"SPX OTC1920 3/4"" Drive 2-1/4"" 6 Point Truck Wheel Bearing Locknut Socket"

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $24.99

“The OTC1920 is a 2-1/4 6 point truck wheel bearing locknut socket. The socket has a 3/4 square drive opening, permitting the use of an extension and torque wrench to tighten locknut as required. The locknut removal and installation is simple, even when wide-rim wheels are involved, since a long extension may be attached to the socket to provide the necessary clearance.”

read the full article

No Rating

Share/Save/Bookmark

"SPX OTC7164 16"" Rolling Head Pry Bar"

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $23.99

The SPX OTC7164 is a 16 Rolling Head Pry Bar. The rolling head makes a great deal of leverage possible. Its long tapered body may be used as a lining-up drift.

read the full article

No Rating

Share/Save/Bookmark

OTC 4503 Stinger SAE Double Flaring Tool Kit

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $19.99

“The OTC 4503 is a Stinger SAE Double Flaring Tool Kit. The OTC 4503 is designed for double or single flare in copper, aluminum, soft steel brake line and brass tubing (to 45). Includes five adapters 3/16 through 1/2 (4.8mm through 12.7mm).”

read the full article

No Rating

Share/Save/Bookmark

OTC 5604 Motorcycle Compression Tester Kit

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $99.99

“The OTC 5604 is a Motorcycle Compression Tester Kit. The OTC 5604 is designed specifically for testing motorcycle and small engines. This kit has a specially designed compression gauge and hose assembly, plus three different size hose adapters. The compression tester and hose lengths are designed for optimal viewing along side engine. The OTC 5604 covers most popular motorcycle and small engine plug sizes.”

read the full article

No Rating

Share/Save/Bookmark

OTC1914 LOCKNUT WR 4 IN. HEX

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $26.99

read the full article

No Rating

Share/Save/Bookmark

OTC 6295 5-Pc Front End Service Tool Set

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $124.99

“The OTC 6295 is a 5-Pc Front End Service Tool Set. The kit includes five popular tools used for servicing Pitman arms, ball joints and tie rods on most vehicles.”

read the full article

No Rating

Share/Save/Bookmark

"OTC 1130 1/2"" - 9"" Capacity Bearing Splitter"

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $124.99

“The OTC 1130 is a 1/2 - 9 Capacity Bearing Splitter. The OTC 1130 features knife-like edge which is easily placed behind the part to secure a gripping surface, even when clearances are extremely limited.”

read the full article

No Rating

Share/Save/Bookmark

OTC 7315A Universal Tie Rod End Remover

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $44.99

“The OTC 7315A is an Universal Tie Rod End Remover. The remover is redesigned to use on imports and many front wheel drive vehicles, including SUVs with rack and pinion steering. Live center tip on forcing screw swivels to align tool to tie rod stud to ease in removal and prevent damage to stud.”

read the full article

No Rating

Share/Save/Bookmark

OTC 4528 17-Pc Stinger Clutch Alignment Tool Kit

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $39.99

“The OTC 4528 is a 17-Pc Stinger Clutch Alignment Tool Kit. The OTC 4528 is essential for clutch installation on virtually all cars and light-duty trucks. It aligns clutch plate properly by using tapered cones and pilot adapters. Includes seven fractional pilot adapters, one clutch disc centering adapter and one alignment shaft. It also includes five metric pilot adapters, two clutch disc centering adapters and one alignment shaft. It comes in a blow-molded storage case.”

read the full article

No Rating

Share/Save/Bookmark

SPX OTC7157 4 Slots Ford Bronco Front Wheel Bearing Locknut Socket

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $28.99

” The OTC7157 is a 4 slots ford bronco front wheel bearing locknut socket. It is used with 1993-newer Ford Ranger, Bronco II and Explorer with manual hubs 1995-newer Ford F-series 1/2 ton trucks and full-size Bronco with manual hubs 1959-1985 Ford F-series 1/2 and 3/4 ton truck and full size Bronco 1960-1990 GM 1/2 ton trucks and full size Blazer/Jimmy 1969-1972 International 1/2 ton trucks 1969-1989 Dodge 1/2 ton trucks with manual hubs. “

read the full article

No Rating

Share/Save/Bookmark

"SPX OTC1908 3/4"" Drive 3-1/4"" 6 Point Truck Wheel Bearing Locknut Socket"

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $19.99

“The OTC1908 is a 3-1/4 6 point bearing locknut socket. The socket has a 3/4 square drive opening, permitting the use of an extension and torque wrench to tighten the locknut as required. Its locknut removal and installation is simple, even when wide-rim wheels are involved, since a long extension may be attached to the socket to provide the necessary clearance.”

read the full article

No Rating

Share/Save/Bookmark

OTC 1500A Stinger 3-Ton Jack Pack - Floor Jack plus Jack Stands

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $119.99

” -3-Ton Service Jack -The Stinger 3-ton hydraulic service jack is designed for the budget-minded shop owner who still wants the quality of an OTC product. -Built from select steel, this jack can stand up to the abuse that jacks are subjected to daily. Yet, the lightcompact design makes it easy and convenient to use. -A built-in safety overload system prevents use beyond the jacks rated capacity. -With rear swivel casters, maneuvering andpositioning the jack is an easy task. -Height range 5 to 20. -2-year Limited Warranty.3-Ton Jack Stands -Formed and welded steel base for strength; self-locking ratchet handle cannot be released under load. Durable baked enamel finish resists corrosion. -Stands conform to ANSI PALD-4 load rating standard; are factory tested before shipment. -Height range 11-5/8 to 17-1/8. “

read the full article

No Rating

Share/Save/Bookmark

Acoustical concepts inc. OTC1901 LOCKNUT WR 2-3/32 HEX

Posted By: shoponlinestores  //  Category: OTC (Division of SPX Corp.)

Price - $25.99

read the full article

No Rating

Share/Save/Bookmark